- Contact Person : Mr. Shuo Heng
- Company Name : Shandong Hengshuo Automation Equipment Incorporation Company
- Tel : 86-534-5215452
- Fax : 86-534-5236452
- Address : Shandong,Dezhou,No.2, Liaoheng Road, Yinhe Economic zone, Ningjin County, Dezhou, Shandong
- Country/Region : China
Automatic Production line of out barrel
Related Product Searches:Automatic Production line of out barrel,High Quality,Automatic Production line of out barrel, Automatic Production line of out barrel,121515265816
Automatic Production line of out barrel
We are located in Yinhe Development Zone of Ninjin County Shandong China. Our factory has an area of 115000 square meters and we have complete and advanced manufacturing equipment. Now we have 35 professional technicists, accounting for 3% of the total employees. We have passed by ISO9001,ISO2000 authentication.
This combined machine with rolling-installing is designed according to the WC6Y-63/2500 press machine and the advanced technology of America.
Shape of the machine body: one side closed, another side opened
The transmission system: the crank rod system with pulley, gear, pneumatic clutch and brake. The bottom end fixed with one poles, and the other side produce the cut by support with the fulcrum.
Mould: has double function with the pressure and rolling for the cut.
Main performance parameters and configuration
Item | Name | parameter | ||
Technical specifications and parameters | The shape of the working piece | round | ||
The minimum stamping force | Min600KN(60>52≈1800×7×4=50.T | |||
Designed capacity | 80T | |||
Diameter of the barrel | No less thanΦ350(length of the barrel less than 2000mm) | |||
The maximum length of the barrel | Depends on the request of customer | |||
Adjustable space of the bottom bar | less than 30mm | |||
Adjustable space of the supporting plate | less than5mm | |||
Route of supporting plate | less than70mm | |||
number of continuous punchings | 60times/min | |||
Working parameter | throughput | 3pcs/min(example:350mm barrel) | ||
High level. Die | 1300mm | |||
Modulus of main components | The maximum modulus bending beam section | |||
| 240-290 steel | |||
| Calculated modulus: 1240>869(cm3) | |||
Frame mold designed according to the actual needs and rotation institutions condition. | ||||
The transmission system use sliding bearing structure | ||||
pneumatic brake and clutch | ||||
| lubricating system | quantitative oil cup | |||
electrical control system | single test controll, two or four joint control, and automatic control in regular production | |||
Processing conditions | supply workpieces | Manual work | ||
Move workpieces | Manual work | |||
Remove workpieces
| Manual or automatic
| |||
Main body of the machine | lathe bed | Overall welding, aging treatment | ||
Lead rail of the board |
| |||
Protection of machine | set shield on important parts. | |||
Protection over mould | Mechanical safety protection | |||
supporting cylinder | Reaction time 2 seconds | |||
mould | Assembly form | single split mold | ||
Turn on | return switch Spring life 100000 times | |||
electrical control gear | Electrical specification | Primary power | 380V±10% | |
Input circuit | 380V | |||
Circuit of main motor | 24V | |||
Control loop | 380V | |||
Light of machine | 36V | |||
stop | Panel | |||
Click Protection | Thermal relay, overload protection, grounding protection | |||
Automatic Production line of out barrel
